汽配人首頁 > 問答首頁

EDA-設計彩燈控制器

設計彩燈控制器要求 1、8個燈全亮； 2、8個燈全滅； 3、從左到右第一個開始每隔一個亮； 4、從右到左第一個開始每隔一個滅； 5、左四個滅，右四個亮； 6、左四個亮，右四個滅；要vhdl源碼: 問 提問者：網友 | 2018-07-18

最佳回答

程序如下： LIBRARY IEEE; USE IEEE.STD_LOGIC_1164.ALL; USE IEEE.STD_LOGIC_UNSIGNED.ALL; ENTITY CDKZ IS PORT(CLK,CLR:IN STD_LOGIC; --時鐘和復位-- COUT:OUT STD_LOGIC_VECTOR(7 DOWNTO 0)); --輸出-- END; ARCHITECTURE BVE OF CDKZ IS TYPE STATE_DDRAM IS --定義狀態機-- (READY, ONE, TWO, THREE, FOUR, FIVE, SIX); SIGNAL STATE,NEXT_STATE:STATE_DDRAM; SIGNAL CNT8:STD_LOGIC_VECTOR(5 DOWNTO 0); --計數信號--- SIGNAL C_T:STD_LOGIC_VECTOR(7 DOWNTO 0); BEGIN P1:PROCESS(CLR,CLK) BEGIN IF CLR='1' THEN STATE<=READY; ELSIF CLK'EVENT AND CLK='1' THEN STATE<=NEXT_STATE;CNT8<=CNT8+1; --雙線狀態機運行方式，計數器到上升沿加1--- END IF; END PROCESS P1; STATE_COM:PROCESS(STATE,NEXT_STATE,CNT8)---狀態機的轉向--- BEGIN CASE STATE IS WHEN READY=>NEXT_STATE<=ONE; ---開始--- WHEN ONE=>NEXT_STATE<=TWO; IF CNT8<"000111" THEN C_T<="11111111";END IF;---8個燈全亮--- WHEN TWO=>NEXT_STATE<=THREE; IF (CNT8>"000111")AND(CNT8<"001111") THEN C_T<="00000000";END IF;--8個燈全滅-- WHEN THREE=>NEXT_STATE<=FOUR; IF CNT8="010000" THEN C_T<="10000000";END IF; IF CNT8="010001" THEN C_T<="01000000";END IF; IF CNT8="0: 回答者：網友

產品精選

我來回答